Capatch

CAPATCH®


Menu

Home

Prodotti

Funzionamento

Precisione

Istruzioni

I nostri clienti

Rivenditori

Ordinazione on-line

Società

Referenze
Scaricare e Stampare l'opuscolo

Fiere


Taratura e precisione

Tests carried out by independent agencies are reported on this page.


University of Wales
Welsh Centre for Printing and Coating
Department of Mechanical Engineering
Singleton Park, Swansea
SA2 8PP
United Kingdom
e-mail: meprint@swan.ac.uk

 


University of Wales, Swansea, shield.
Roll
Wyco Measurement
Capatch
Operator one
Capatch
Operator two
Capatch
Operator three
 
1
2
3
1
2
3
Ave
2.93
3.00
2.97
2.97
3.92
4.12
3.72
3.92
5.27
5.39
5.36
5.34
1
2
3
Ave
3.0
2.9
3.0
2.97
4.0
3.9
3.3
3.73
6.0
5.5
6.0
5.83
1
2
3
Ave
3.1
2.9
2.9
2.97
3.2
2.9
2.9
3.00
5.9
5.5
5.9
5.77
1
2
3
Ave
3.1
3.1
3.1
3.10
3.5
3.1
3.7
3.43
5.9
5.9
6.0
5.93
I dati elencati nella tabella qui sotto sono stati valutati alla DFTA-Technologiezentrum della Fachhochschule Stoccarda dal Sig. Jochen Richter per conto della Steinhart BV.
DFTA-TZ
Nobelstrasse 10
D-70569
Stuttgart
Telefon0: +49 711 67896-10
E-mail: richter@dfta-tz.de
Cilindro anilox
numero
Linee
(L/cm)
Fornitore
(cm3/m2)
Capatch
(cm3/m2)
TCS
(cm3/m2)
VoluCheck
(cm3/m2)
URMI II
(cm3/m2)
1
260
3.5
2.8
2.6
2.5
2.8
2.7
2.5
2.4
2.4
2.4
2.4
2.7
3.1
3.3
3.1
3.0
2.8
2.8
2.8
2.8
2.8
2
220
6.1
4.8
4.0
4.3
4.6
4.4
4.1
4.4
4.0
4.0
4.1
4.7
4.5
4.6
4.4
4.6
3.5
3.5
3.7
3.6
3.6
3
160
7.6
7.9
8.0
7.0
7.8
7.7
7.4
7.4
7.3
7.5
7.4
9.1
8.9
8.9
8.9
9.0
6.9
6.8
6.6
6.7
6.8
4
180
10.3
10.0
9.8
9.8
10.1
9.9
11.9
11.5
11.7
11.6
11.7
10.8
10.4
10.8
10.7
10.7
9.2
9.0
9.1
9.2
9.1
5
100
13.0
11.9
11.0
11.2
11.2
11.3
10.9
11.0
10.9
10.5
10.8
12.4
12.3
12.8
12.6
12.5
10.3
10.4
10.5
10.3
10.4

Footnotes on the measurements
(1) Fornitore: la capacità di un cilindro nuovo e pulito dato dal fornitore di cilindri anilox.
(2) Capatch: ogni risultato rappresenta una misurazione, in totale 4 misurazioni per ogni cilindro anilox.
(3) TCS: Confocal Lasser Scanning Microscope. Ogni risultato rappresenta la media di 5 misurazioni, in totale 20 misurazioni per ogni cilindro anilox. Così un risultato è la media di 5 misurazioni TCS. *
(4) Volucheck: Ogni risultato rappresenta la media di 3 misurazioni, in totale 12 misurazioni per ogni cilindro anilox. Così un risultato è la media di 3 misurazioni. **
(5) Urmi II: Ogni risultato rappresenta la media di 4 misurazioni, in totale 16 misurazioni per ogni cilindro anilox. Così un risultato è la media di 4 misurazioni. **
(6) Media per cilindro di 4 risultati di Capatch (il totale di 4 misurazioni), TCS (il totale di 20 misurazioni), VoluCheck (il totale di 12 misurazioni) o URMI II (il totale di 16 misurazioni).

Validity and reliability
Concerning the results of the DFTA-TZ, the following should be noted:
The variance of means (TCS, VoluCheck and Urmi II) is always smaller than the variance of unit measurements (Capatch). The data as given appears to be biased against the Capatch. I have advised Steinhart BV to have an additional comparison test done by an independant institute so that unit or equal sample size means are compared between devices in order to make a valid comparison of the reliability of the respective measurement techniques. This comparison shall be complicated by the fact that the various techniques are taken across differing surface areas, so that inherent differences in variance shall occur. On the other hand, each act of taking a measurement is the relevant comparative unit for the user.
Drs. Benjamin Rossen
Heikampen 40
5672 SM NUENEN
The Netherlands
e-mail: mathematics@benjaminrossen.com
* Nota Steinhart BV: questo significa che la variazione di questi risultati è molto inferiore alla variazione dei risultati Capatch a causa del modo in cui questi risultati sono stati ottenuti, e non a causa dell''nferiore attendibilità del Capatch.
** Nota Steinhart BV: questo significa che la variazione di questi risultati è molto inferiore alla variazione dei risultati Capatch a causa del modo in cui questi risultati sono stati ottenuti, e non a causa dell''nferiore attendibilità del Capatch. Nonostante questo preconcetto, i risultati Capatch mostrano variazioni simili.
LAST PAGE NEXT PAGE



Inglese | Francese | Tedesco | Italiano | Potoghese | Spagnolo | Polish | Russian | Thai